tencent cloud

Feedback

Configuring Security Group

Last updated: 2022-06-15 10:57:56

    Overview

    A security group is a stateful virtual firewall capable of filtering. As an important means for network security isolation provided by Tencent Cloud, it can be used to set network access controls for one or more TencentDB instances. Instances with the same network security isolation demands in one region can be put into the same security group, which is a logical group. TencentDB and CVM share the security group list and are matched with each other within the security group based on rules. For specific rules and limitations, see Security Group Overview.

    Note:

    • TDSQL-C for MySQL security groups currently only support network access control for VPCs and public networks but not the classic network.
    • Security groups associated with TencentDB instances in the Frankfurt, Silicon Valley, and Singapore regions currently do not support public network access control.
    • As TencentDB does not have active outbound traffic, outbound rules are not applicable to TencentDB.
    • TDSQL-C for MySQL security groups support primary and read-only instances.

    Configuring Security Groups for TencentDB

    Step 1. Create a security group

    1. Log in to the CVM console.
    2. Select Security Group on the left sidebar, select a region, and click Create.
    3. In the pop-up dialog window, configure the following items, and click OK.
    • Template: select a template based on the service to be deployed on the TencentDB instance in the security group, which simplifies the security group rule configuration, as shown below:
      TemplateDescriptionRemarks
      Open all portsAll ports are open. May present security issues.-
      Open ports 22, 80, 443, and 3389 and the ICMP protocolPorts 22, 80, 443, and 3389 and the ICMP protocol are opened to the internet. All ports are opened to the private network.This template does not take effect for TencentDB.
      CustomYou can create a security group and then add custom rules. For detailed directions, see "Step 2. Add a security group rule" below.-
    • Name: name of the security group.
    • Project: select a project for easier management. By default, DEFAULT PROJECT is selected.
    • Notes: a short description of the security group for easier management.

    Step 2. Add a security group rule

    1. On the Security Group page, click Modify Rule in the Operation column on the row of the security group for which to configure a rule.
    2. On the security group rule page, click Inbound rule > Add Rule.
    3. In the pop-up window, set the rule.
    • Type: Custom is selected by default. You can also choose another system rule template. MySQL(3306) is recommended.
    • Source or Target: traffic source (inbound rules) or target (outbound rules). You need to specify one of the following options:
      Source or TargetDescription
      A single IPv4 address or an IPv4 rangeIn CIDR notation, such as 203.0.113.0, 203.0.113.0/24 or 0.0.0.0/0, where 0.0.0.0/0 indicates all IPv4 addresses will be matched.
      A single IPv6 address or an IPv6 rangeIn CIDR notation, such as FF05::B5, FF05:B5::/60, ::/0 or 0::0/0, where ::/0 or 0::0/0 indicates all IPv6 addresses will be matched.
      ID of referenced security group. You can reference the ID of:
      • Current security group
      • Other security group
      • To reference the current security group, enter the ID of security group associated with the CVM.
      • You can also reference another security group in the same region and the same project by entering the security group ID.
      Reference an IP address object or IP address group object in a parameter template.-
    • Protocol Port: enter the protocol type and port range or reference a protocol/port or protocol/port group in a parameter template.
      Note:

      To connect to a TDSQL-C for MySQL instance, its port must be opened. You can log in to the TDSQL-C console, click a cluster ID to enter the cluster details page, and view the port number.
      The security group rules displayed on the Security Group page in the TDSQL-C for MySQL console take effect for private and public (if enabled) network addresses of the TDSQL-C for MySQL instance.

    • Policy: Allow or Reject. Allow is selected by default.
      • Allow: traffic to this port is allowed.
      • Reject: data packets will be discarded without any response.
    • Notes: a short description of the rule for easier management.
    1. Click Complete.

      Step 3. Configure a security group

      A security group is an instance-level firewall provided by Tencent Cloud for controlling inbound traffic of TencentDB. You can associate a security group with an instance when purchasing it or later in the console.
    Note:

    Currently, security groups can be configured only for TDSQL-C for MySQL instances in VPCs.

    1. Log in to the TDSQL-C console and click a cluster ID in the cluster list to enter the cluster management page.
    2. On the cluster management page, select the Security Group tab and click Configure Security Group.
    3. In the pop-up window, select the security group to be bound and click OK.

    Importing Security Group Rules

    1. On the Security Group page, click the ID/name of the target security group.
    2. On the Inbound rule or Outbound rule tab, click Import Rule.
    3. In the pop-up window, select an edited inbound/outbound rule template file and click Import.
      Note:

      As existing rules will be overwritten after importing, we recommend that you export the existing rules before importing new ones.

    Cloning Security Groups

    1. On the Security Group page, locate the target security group and click More > Clone in the Operation column.
    2. In the pop-up window, select the target region and target project, enter the new security group name, and click OK. If the new security group needs to be associated with a CVM instance, do so by managing the CVM instances in the security group.

    Deleting Security Groups

    1. On the Security Group page, locate the security group to be deleted and click More > Delete in the Operation column.
    2. Click OK in the pop-up window. If the current security group is associated with a CVM instance, it must be disassociated before it can be deleted.
    Contact Us

    Contact our sales team or business advisors to help your business.

    Technical Support

    Open a ticket if you're looking for further assistance. Our Ticket is 7x24 avaliable.

    7x24 Phone Support