Domain name for API request: vpc.tencentcloudapi.com.
This API (AssignIpv6SubnetCidrBlock) is used to assign IPv6 subnet IP ranges.
IPv6
IP range to a subnet, the VPC
that the subnet belongs to should have obtained the IPv6
IP range. If this has not been assigned, use the AssignIpv6CidrBlock
API to assign an IPv6
IP range to the VPC
to which the subnet belongs. Otherwise, the IPv6
subnet IP range cannot be assigned.A maximum of 20 requests can be initiated per second for this API.
The following request parameter list only provides API request parameters and some common parameters. For the complete common parameter list, see Common Request Parameters.
This document describes the parameters for Signature V1. It's recommended to use the V3 signature, which provides higher security. Note that for Signature V3, the common parameters need to be placed in the HTTP Header. See details.
Parameter Name | Required | Type | Description |
---|---|---|---|
Action | Yes | String | Common parameter. The value used for this API: AssignIpv6SubnetCidrBlock. |
Version | Yes | String | Common parameter. The value used for this API: 2017-03-12. |
Region | Yes | String | Common parameter. For more information, please see the list of regions supported by the product. |
VpcId | Yes | String | The ID of the VPC where the subnet is located, such as vpc-f49l6u0z . |
Ipv6SubnetCidrBlocks.N | Yes | Array of Ipv6SubnetCidrBlock | The assigned IPv6 subnet IP range list. |
Parameter Name | Type | Description |
---|---|---|
Ipv6SubnetCidrBlockSet | Array of Ipv6SubnetCidrBlock | The assigned IPv6 subnet IP range list. |
RequestId | String | The unique request ID, which is returned for each request. RequestId is required for locating a problem. |
https://vpc.tencentcloudapi.com/?Action=AssignIpv6SubnetCidrBlock
&VpcId=vpc-rkxd3pgh
&Ipv6SubnetCidrBlocks.0.SubnetId=subnet-ewhv1m9e
&Ipv6SubnetCidrBlocks.0.Ipv6CidrBlock=3402:4e00:20:1201::/64
&Ipv6SubnetCidrBlocks.0.SubnetId=subnet-3s5bhzb0
&Ipv6SubnetCidrBlocks.0.Ipv6CidrBlock=3402:4e00:20:1202::/64
&<Common request parameters>
{
"Response": {
"Ipv6SubnetCidrBlockSet": [
{
"SubnetId": "subnet-ewhv1m9e",
"Ipv6CidrBlock": "3402:4e00:20:1201::/64"
},
{
"SubnetId": "subnet-3s5bhzb0",
"Ipv6CidrBlock": "3402:4e00:20:1202::/64"
}
],
"RequestId": "75221557-b667-440a-8cfe-ccd1bde2a234"
}
}
TencentCloud API 3.0 integrates SDKs that support various programming languages to make it easier for you to call APIs.
The following only lists the error codes related to the API business logic. For other error codes, see Common Error Codes.
Error Code | Description |
---|---|
InvalidParameterValue.Duplicate | The input parameter already exists. |
InvalidParameterValue.Malformed | Invalid input parameter format. |
InvalidParameterValue.SubnetConflict | Subnet CIDR conflict. |
InvalidParameterValue.SubnetRange | Invalid subnet CIDR. |
LimitExceeded.SubnetCidrBlock | The number of subnet IP ranges assigned in the subnet has reached the upper limit. |
MissingParameter | Missing parameter. |
ResourceNotFound | The resource does not exist. |
Was this page helpful?