tencent cloud

Feedback

Cisco ASR Series Routers

Last updated: 2022-05-10 16:58:07

    Direct Connect connects Tencent Cloud with the user IDC with a dedicated physical line. After configuring the Direct Connect gateway and dedicated tunnel on the Tencent Cloud side, users need to configure routes on the local IDC.

    Note:

    This document only introduces the local routing configurations associated with Tencent Cloud Direct Connect. For other information, please see the local router documentation or consult your router provider.

    Routing Configuration

    Note:

    It's recommended that you use the default configurations of Keepalive and holdtime for the BGP connection between the two peers. The holdtime is three times the interval at which keepalive messages are sent. The recommended holdtime value is 180s.

    # Configure ports
    interfaces <interface_number>
    description <interface_desc>
    no shutdown
    speed <interface_speed>
    duplex full
    no negotiation auto
    commit
    # Configure virtual tunnels
    interfaces <interface_number>.<subinterface_number>
    description <subinterface_desc>
    encapsulation dot1q <subinterface_vlanid>
    ipv4 address <subinterface_ipaddress> <subinterface_netmask>
    bfd interval <value> min_rx <value> multiplier <value> //BFD parameter
    commit
    # Set eBGP
    router bgp <as_number>
    #bgp router-id <router_id>
    neighbor <bgp_peer_address>
    remote-as <bgp_peer_as_number>
    password encrypted <bgp_auth_key>
    description <bgp_peer_desc>
    remote-as <bgp_peer_as_number> fall-over bfd //Configure BFD for BGP
    commit
    
    Contact Us

    Contact our sales team or business advisors to help your business.

    Technical Support

    Open a ticket if you're looking for further assistance. Our Ticket is 7x24 avaliable.

    7x24 Phone Support