Create Live Channel

Last updated: 2020-06-07 19:09:47


    This is a legacy API which has been hidden and will no longer be updated. We recommend using the new LVB API 3.0 which is standardized and faster.

    Creating a Channel

    1. API description

    Domain name:

    2. Input parameters

    Parameter Name Required Type Description
    channelName Yes String Channel name
    channelDescribe No string LVB channel description
    outputSourceType Yes int Select an output source. 1: RTMP output only; 2: HLS output only; 3: Both RTMP and HLS output.
    playerPassword No string Password for the receiver's player.
    sourceList Yes array An LVB source list. Each LVB source may contain the type, name, and address (limited to stream pulling). Note: Only one LVB source is supported.
    watermarkId No int Watermark ID
    outputRate No array Output bitrate. Note: For the parameter array, 0 indicates the original bitrate, 10 indicates a bitrate of 550 (standard definition), and 20 indicates a bitrate of 900 (high definition). The value 0 is required if you need to set the bitrate.

    The sourceList structure is as follows:

    Parameter Name Required Type Description
    name Yes string LVB source name
    type Yes int 1: RTMP push

    3. Output parameters

    Parameter Name Type Description
    code Int Error code. 0: Successful; other values: Failed
    message String Error message
    channel_id String Channel ID

    4. Examples

    Input (RTMP push)

    https://domain/v2/index.php?Action=CreateLVBChannel&channelName=%E5%9B%BD%E9%99%85%E4%B9%92%E4%B9%93%E7%90%83%E9%94%A6%E6%A0%87%E8%B5%9B3&outputSourceType=2& request parameters


        "code": 0,
      "message": "",
    "channel_id": "XXX",
                "hls_downstream_address": "",
                "rtmp_downstream_address": "rtmp://",
                "flv_downstream_address": ""

    5. Standard parameter definitions

    Channel status definitions:

    Value Status
    0 No input stream
    1 LVB in progress
    2 Exception
    3 Disable

    Receiver type definitions:

    Type Description
    1 RTMP output
    2 HLS output
    3 RTMP and HLS output

    LVB stream protocol definitions:

    Type Description
    1 RTMP push
    2 RTMP pull
    3 HLS pull

    Was this page helpful?

    Was this page helpful?

    • Not at all
    • Not very helpful
    • Somewhat helpful
    • Very helpful
    • Extremely helpful
    Send Feedback