# Configure ports
set interfaces <interface_number> description <interface_desc>
set interfaces <interface_number> vlan-tagging
set interfaces <interface_number> link-mode full-duplex
set interfaces <interface_number> speed <interface_speed> // Whether this command can be configured depends on whether the module supports it
set interfaces <interface_number> gigether-options no-auto-negotiation // This command is recommended to be used in combination with
Usage
commit

# Configure virtual tunnels
set interfaces <interface_number> unit <subinterface_number> vlan-id <subinterface_vlanid>
set interfaces <interface_number> unit <subinterface_number> description <subinterface_desc>
set interfaces <interface_number> unit <subinterface_number> family inet address
<subinterface_ipaddress>/<subinterface_netmask>
commit

# Set eBGP 
set protocols bgp group ebgp type external // Define protocol group. Changing ebgp name is allowed.
set protocols bgp group ebgp neighbor <bgp_peer_address> loacal-as <as_number> // If not configured, the global AS number will be used
 by default (set routing-options autonomous-system XX)
set protocols bgp group ebgp neighbor <bgp_peer_address> peer-as <bgp_peer_as_number>
set protocols bgp group ebgp neighbor <bgp_peer_address> authentication-key <bgp_auth_key>
set protocols bgp group ebgp neighbor <bgp_peer_address> description <bgp_peer_desc>
commit

# Configure BFD for eBGP
set protocols bgp group ebgp neighbor <bgp_peer_address> bfd-liveness-detection minimum-interval <value>