Direct Connect connects Tencent Cloud with the user IDC with a dedicated physical line. After configuring the Direct Connect gateway and dedicated tunnel on the Tencent Cloud side, users need to configure routes on the local IDC.
This document only introduces the local routing configurations associated with Tencent Cloud Direct Connect. For other information, please see the local router documentation or consult your router provider.
It's recommended that you use the default configurations of
holdtimefor the BGP connection between the two peers. The
holdtimeis three times the interval at which keepalive messages are sent. The recommended
holdtimevalue is 180s.
<interface_number> description <interface_desc> port link-mode route undo shutdown speed <interface_speed> duplex full interface interface-number.subnumber description <vlan_description> dot1q termination vid <vlanid> ip address <subinterface_ipaddress> <subinterface_netmask> nqa entry <admin-name> < test-name> type icmp-echo //Default detection type destination-address x.x.x.x（nexthop-address ）//Detection address interval seconds 2 //Detection interval frequency <value> //Detection frequency history-record enable probe count <value> //Number of packets per detection probe timeout <value> //Timeout period track <number> nqa entry <admin-name>< test-name> //Associate Track with NQA ip route-static <Destination_IP_address> <Mask_of_the-IP_address> <VLAN_interface> track <number>interfaces