Accessing a Custom Origin Server Domain over HTTPS Failed

Last updated: 2021-05-25 11:43:11

    Symptoms

    When I access a custom origin server domain over HTTPS, an error is reported.

    Possible Causes

    The certificate configuration is incorrect or the custom origin server domain is not configured.

    Troubleshooting Procedure

    Using a CDN certificate

    1. Log in to the CDN console.
    2. In the left sidebar, click Domain Management.
    3. Click the name of the domain to configure. Then, select the HTTPS Configuration tab.
    4. In the HTTPS Configuration area, click Configure Now.
      For more information, please see HTTPS Configuration Guide.
    5. Wait for about 5 minutes. When the CDN domain is deployed again, you can use HTTPS.

    Using a COS certificate

    1. Log in to the COS console.

    2. Click Bucket List in the left sidebar.

    3. Click the name of the desired bucket to go to the configuration page.

    4. Click Domains and Transfer > Custom Endpoint.

    5. Select the desired domain and click Bind Certificate to configure the certificate.

      注意:

      Currently, certificate binding supports only the Beijing, Shanghai, Chengdu, and Hong Kong (China) regions. Binding wildcard certificates is not supported.

    6. Click Confirm.

    When the value of HTTPS certificate is Uploaded, you can use HTTPS.

    Using a CVM reverse proxy certificate

    For more information, please see Supporting HTTPS for Custom Endpoints.