1. API Description

Domain name for API request: vpc.tencentcloudapi.com.

This API is used to create security group policies (SecurityGroupPolicy).

For parameters of SecurityGroupPolicySet,

• `Version`: the version number of a security group policy, which automatically increases by one each time you update the security policy, to prevent expiration of the updated routing policies. If it is left empty, any conflicts will be ignored.
• When creating the `Egress` and `Ingress` polices,
  • `Protocol`: allows TCP, UDP, ICMP, ICMPV6, GRE, or ALL.
  • `CidrBlock`: a CIDR block in the correct format. In a classic network, if a `CidrBlock` contains private IPs on Tencent Cloud for devices under your account other than CVMs, it does not mean this policy allows you to access these devices. The network isolation policies between tenants take priority over the private network policies in security groups.
  • `Ipv6CidrBlock`: an IPv6 CIDR block in the correct format. In a classic network, if an `Ipv6CidrBlock` contains private IPv6 addresses on Tencent Cloud for devices under your account other than CVMs, it does not mean this policy allows you to access these devices. The network isolation policies between tenants take priority over the private network policies in security groups.
  • `SecurityGroupId`: ID of the security group. It can be the ID of security group to be modified, or the ID of other security group in the same project. All private IPs of all CVMs under the security group will be covered. If this field is used, the policy will automatically change according to the CVM associated with the group ID while being used to match network messages. You don't need to change it manually.
  • `Port`: a single port number such as 80, or a port range in the format of '8000-8010'. You may use this field only if the `Protocol` field takes the value `TCP` or `UDP`. Otherwise `Protocol` and `Port` are mutually exclusive.
  • `Action`: only allows `ACCEPT` or `DROP`.
  • `CidrBlock`, `Ipv6CidrBlock`, `SecurityGroupId`, and `AddressTemplate` are mutually exclusive. `Protocol` + `Port` and `ServiceTemplate` are mutually exclusive.
  • You can only create policies in one direction in each request. To specify the `PolicyIndex` parameter, use the same index number in policies.

A maximum of 100 requests can be initiated per second for this API.

Note: This API supports Finance regions. If the common parameter Region is a Finance region, a domain name with the Finance region needs to be specified, for example: vpc.ap-shanghai-fsi.tencentcloudapi.com

2. Input Parameters

The following request parameter list only provides API request parameters and some common parameters. For the complete common parameter list, see Common Request Parameters.

3. Output Parameters

4. Example

Example1 Adds inbound policies to a security group

Input Example

https://vpc.tencentcloudapi.com/?Action=CreateSecurityGroupPolicies
&Version=2017-03-12
&SecurityGroupId=sg-ohuuioma
&SecurityGroupPolicySet.Version=21
&SecurityGroupPolicySet.Ingress.0.PolicyIndex=1
&SecurityGroupPolicySet.Ingress.0.ServiceTemplate.ServiceId=ppm-f5n1f8da
&SecurityGroupPolicySet.Ingress.0.AddressTemplate.AddressId=ipm-2uw6ujo6
&SecurityGroupPolicySet.Ingress.0.Action=accept
&SecurityGroupPolicySet.Ingress.0.PolicyDescription=TestPolicy
&SecurityGroupPolicySet.Ingress.1.PolicyIndex=1
&SecurityGroupPolicySet.Ingress.1.ServiceTemplate.ServiceId=ppm-f5n1f8da
&SecurityGroupPolicySet.Ingress.1.AddressTemplate.AddressId=ipm-2uw6ujo6
&SecurityGroupPolicySet.Ingress.1.Action=accept
&SecurityGroupPolicySet.Ingress.1.PolicyDescription=Test
&<Common request parameter>

Output Example

{
  "Response": {
    "RequestID": "354f4ac3-8546-4516-8c8a-69e3ab73aa8a"
  }
}

Example2 Adds outbound policies to a security group

Input Example

https://vpc.tencentcloudapi.com/?Action=CreateSecurityGroupPolicies
&Version=2017-03-12
&SecurityGroupId=sg-ohuuioma
&SecurityGroupPolicySet.Version=21
&SecurityGroupPolicySet.Egress.0.PolicyIndex=1
&SecurityGroupPolicySet.Egress.0.ServiceTemplate.ServiceId=ppm-f5n1f8da
&SecurityGroupPolicySet.Egress.0.AddressTemplate.AddressId=ipm-2uw6ujo6
&SecurityGroupPolicySet.Egress.0.Action=accept
&SecurityGroupPolicySet.Egress.0.PolicyDescription=TestPolicy
&SecurityGroupPolicySet.Egress.1.PolicyIndex=1
&SecurityGroupPolicySet.Egress.1.ServiceTemplate.ServiceId=ppm-f5n1f8da
&SecurityGroupPolicySet.Egress.1.AddressTemplate.AddressId=ipm-2uw6ujo6
&SecurityGroupPolicySet.Egress.1.Action=accept
&SecurityGroupPolicySet.Egress.1.PolicyDescription=Test
&<Common request parameter>

Output Example

{
  "Response": {
    "RequestID": "53ee3ed3-c9ed-48ba-8a57-8624b9c0d3b8"
  }
}

5. Developer Resources

SDK

TencentCloud API 3.0 integrates SDKs that support various programming languages to make it easier for you to call APIs.

• Tencent Cloud SDK 3.0 for Python
• Tencent Cloud SDK 3.0 for Java
• Tencent Cloud SDK 3.0 for PHP
• Tencent Cloud SDK 3.0 for Go
• Tencent Cloud SDK 3.0 for NodeJS
• Tencent Cloud SDK 3.0 for .NET
• Tencent Cloud SDK 3.0 for C++

Command Line Interface

• Tencent Cloud CLI 3.0

6. Error Code

The following only lists the error codes related to the API business logic. For other error codes, see Common Error Codes.