Domain name for API request: live.tencentcloudapi.com.
This API is used to modify the transcoding template configuration.
A maximum of 200 requests can be initiated per second for this API.
The following request parameter list only provides API request parameters and some common parameters. For the complete common parameter list, see Common Request Parameters.
| Parameter Name | Required | Type | Description |
|---|---|---|---|
| Action | Yes | String | Common parameter. The value used for this API: ModifyLiveTranscodeTemplate. |
| Version | Yes | String | Common parameter. The value used for this API: 2018-08-01. |
| Region | No | String | Common parameter. This parameter is not required for this API. |
| TemplateId | Yes | Integer | Template ID. |
| Vcodec | No | String | Video codec: h264/h265/origin. Default value: h264.origin: original codec as the output codec |
| Acodec | No | String | Audio codec: acc by default. Note: this parameter is unsupported now. |
| AudioBitrate | No | Integer | Audio bitrate. Default value: 0. Value range: 0-500. |
| Description | No | String | Template description. |
| VideoBitrate | No | Integer | Video bitrate. Value range: 0–8,000 Kbps. If the value is 0, the original bitrate will be retained. Note: transcoding templates require a unique bitrate. The final saved bitrate may differ from the input bitrate. |
| Width | No | Integer | Width in pixels. Value range: 0-3,000. It must be a multiple of 2. The original width is 0 |
| NeedVideo | No | Integer | Whether to keep the video. 0: no; 1: yes. Default value: 1. |
| NeedAudio | No | Integer | Whether to keep the audio. 0: no; 1: yes. Default value: 1. |
| Height | No | Integer | Height in pixels. Value range: 0-3,000. It must be a multiple of 2. The original height is 0 |
| Fps | No | Integer | Frame rate in fps. Default value: 0. Value range: 0-60 |
| Gop | No | Integer | Keyframe interval in seconds. Value range: 2-6 |
| Rotate | No | Integer | Rotation angle. Default value: 0. Valid values: 0, 90, 180, 270 |
| Profile | No | String | Encoding quality: baseline/main/high. |
| BitrateToOrig | No | Integer | Whether to use the original bitrate when the set bitrate is larger than the original bitrate. 0: no, 1: yes Default value: 0. |
| HeightToOrig | No | Integer | Whether to use the original height when the set height is higher than the original height. 0: no, 1: yes Default value: 0. |
| FpsToOrig | No | Integer | Whether to use the original frame rate when the set frame rate is larger than the original frame rate. 0: no, 1: yes Default value: 0. |
| AdaptBitratePercent | No | Float | Bitrate compression ratio of top speed codec video. Target bitrate of top speed code = VideoBitrate * (1-AdaptBitratePercent) Value range: 0.0-0.5. |
| ShortEdgeAsHeight | No | Integer | This parameter is used to define whether the short side is the video height. 0: no, 1: yes. The default value is 0. |
| Parameter Name | Type | Description |
|---|---|---|
| RequestId | String | The unique request ID, which is returned for each request. RequestId is required for locating a problem. |
https://live.tencentcloudapi.com/?Action=ModifyLiveTranscodeTemplate
&TemplateId=1001
&Vcodec=h265
&Acodec=aac
&AudioBitrate=600
&Description=test
&VideoBitrate=1500
&Width=250
&NeedVideo=1
&NeedAudio=1
&Height=240
&Fps=30
&Gop=3
&Rotate=0
&Profile=main
&BitrateToOrig=0
&HeightToOrig=0
&FpsToOrig=0
&<Common request parameters>{
"Response": {
"RequestID": "3c140219-cfe9-470e-b241-907877d6fb03"
}
}This tool allows online call, signature authentication, SDK code generation and quick search of APIs to greatly improve the efficiency of using TencentCloud APIs.
TencentCloud API 3.0 integrates SDKs that support various programming languages to make it easier for you to call APIs.
The following only lists the error codes related to the API business logic. For other error codes, see Common Error Codes.
| Error Code | Description |
|---|---|
| FailedOperation.NotFound | No records found. |
| InternalError | Internal error. |
| InternalError.ArgsNotMatch | For the transcoding template adding API. |
| InternalError.ConfInUsed | The template is in use. |
| InternalError.ConfNotFound | The template does not exist. |
| InternalError.ConfOutLimit | The number of templates exceeds the limit. |
| InternalError.InvalidInput | Parameter check failed. |
| InternalError.NotFound | The record does not exist. |
| InternalError.RuleAlreadyExist | The rule has already been configured. |
| InternalError.RuleInUsing | The rule is in use. |
| InternalError.RuleNotFound | The rule does not exist. |
| InternalError.RuleOutLimit | The rule exceeds the limit. |
| InvalidParameter | Invalid parameter. |
| InvalidParameterValue | Invalid parameter value. |
| MissingParameter | Parameter missing. |
Was this page helpful?